Home/Shop/Dinghy Davits/H2O Dinghy Davit System

H2O Dinghy Davit System

H2O Dinghy Davit System


(2 customer reviews)

MSRP  $1399.95 – $1599.95   you save $100 today!

H2O Dinghy Davit™ (Hurley’s 2nd Option)  . . .  
a classy yet functional design!

This rugged dinghy davit system lets you lift and pull your dinghy on for easy storage or just push-off for launching.  Easily mounted on the swim platform and can be installed while the vessel is in the water.

  • Superior Quality and Craftsmanship
  • Can be used for Soft or Rigid Tenders
  • Position Adjusting Chock System, adjusts to Rigid Hull Configuration for Hard Bottoms
  • Wide Footprint for Soft Bottoms
  • Adjustable Cradle Angles for Easy Deployment & Retrieval
  • Independent Cradles with Rollers
  • Roller Wells have Weep Holes for Water Drainage
  • Multiple Mount Sizes to Accommodate Different Size Platforms
  • Can Be Used on Hydraulic Swim Platforms with Existing Channels to Remove Those Ugly and Dangerous Chocks
  • Numerous adjustments for your convenience
  • Weighs in at only 15 pounds
  • Two year warranty

Review our Recommended Tie-Down Method.

Note: You must select your Mount Size to see pricing and/or to add it to your cart.  Instructions to properly select your Mount Size are below! 

Purchase includes: H2O Dinghy Davit™, Mounts and Mounting Plates. Mounting bolts are not included.   Two year warranty.  Made in the U.S.A.

Ask about our special Highfield tender davit inserts.

Add accessories for a complete package

Product Details

H2O Dinghy Davit ™

The H2O Dinghy Davit has a Sleek Euro Design, Marine Grade High Density Polyethylene Cradles and Stainless Steel Components, Functions as Good as it Looks, and is Impervious to Harsh Environments.  Our revolutionary new stainless steel mounting system provides a quick release, leaving a very small footprint profile that could pull a barge.  Each mount footprint requires only two bolts for the install and only stands 5/8″ high leaving a clear deck for any activity.

The H2O has been designed for either soft or hard bottoms.  The soft bottom model offers a wide 3″ footprint for your tender.  This helps in the support of the transom where most of the weight is and is much easier on the bottom.  If you start out with a soft bottom tender and upgrade to a hard bottom, no problem, remove the soft bottom pads and add the adjustable Chock Pads.

The H2O Dinghy Davit™ is easily mounted on the swim platform.  This hassle free system lets you lift and pull your dinghy on for easy storage or just push-off for launching.  Always available in an emergency.

Featured in the Product Showcase of the 2012 Miami International Boat Show . . .

If you have a lip on the outer edge of your platform, let us know how high it is and we will ship you free shims with your purchase.   The difficultly of retrieval depends upon the weight of your dinghy and the height of your platform off the water.

Hurley Marine, Inc. pioneered the original swim platform davit of this style back in 2002.  Since the original, our research and development (R&D) team have worked to provide the consumer with the very best in design and quality for versatility and years of enjoyment.  We believe that you should enjoy taking your tender along but not sacrificing your vessel’s performance.  The low profile storage position on our davits provide exceptional stern visibility with none of the performance-robbing kite flying drag.  There are no other dinghy davits that compare!.  Make Sure it says “HURLEY” . . .   Sold Worldwide!

Fill-out our Davit Worksheet Form  to help us determine which system and mount size would be best for you.

Properly Measuring for your Davit Mount Size

Key Dimensions Needed

Key Dimensions to Determine Mount Size

A = Swim platforms internal width
B = Platforms depth (transom to edge)
C = Distance from top of platform to the water
D = Beam of dinghy

To determine which mount system will work best for you, measure the beam of your dinghy, divide by 2 and add 4 inches. Now measure your platform (transom to the end).

You must add a number below to your platform length figure in order to determine which mount to use.

Example: If your dinghy width is 60″ then divide by 2 + 4″ = 34″. Swim platform is 32″. By adding 2″ to the platform this would make it equal to the dinghy width of 34″ so then you would have chosen the 6″ mount.

• 0 – 2″ for the 6″ Mount
• 2″-4″ for the 8″ Xtensions
• 4″-6″ for the 10″ Xtensions
• 6″+ for the 36″ Xtensions

Hint: 4 inches of the mount must be used to secure to the platform.

If you have a lip on the upper edge of your platform, let us know how high it is and we will include free shims with your purchase.

If your having problems determining the right mount size, fillout our Davit Worksheet Form or give us a hail at 1.906. 553.6249

Replacement Parts & Accessories for H2O Davits

2 reviews for H2O Dinghy Davit System

  1. Gordon

    The Hurley Davits are the best made ones on the market! And customer service is so great. I send all my boating friends to hurley!

  2. rodrigo

    I’m very satisfied with my H2O’s, they are light and well made. When not in use the hardware on my platform is almost out of sight, this summer I had a chance to use them a lot, I’m very pleased with the product. I recommend this to everyone. and I also commend the good service by Mr. Hurley.

Add a review

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

You may also like…