MSRP $2,189.95 – $3,489.95 you save $100 today!
H3O Dinghy Davit™ (Hurley’s 3rd Option) . . . the Hottest Dinghy Davits on the market!
These rugged H3O dinghy davit systems let you winch your dinghy on for easy storage or just push-off for launching.
- CAD design software was used throughout the product development cycle of this complex design yet simple for easy use.
- Impressive combination of design and function with superior quality & craftsmanship.
- Universal linear bunk design to fit a multitude of hull designs such as ribs, rigid tenders, jet ski’s ( Sea-Doo Spark ) and other craft.
- Made of Marine Grade High Density Polyethylene for strength and to reduce friction during retrieval and launching.
- Ideal for high swim platforms, docks and/or heavy tenders.
- Our revolutionary new stainless steel mounting system provides a quick release, leaving a very small footprint profile that could pull a barge.
- Easily mounted on the swim platform and can be installed while the vessel is in the water, in most cases.
- Made in the U.S.A.
H3O stats:
- Braking Hand Winch. Electric winch available.
- 3′ to 5’ adjustable and removable winch arm.
- Overall weight: 50 pounds (22.67 kg)
- 400 pounds (181.43 kg) capacity.
- H3O Davit Extension available.
- H3O Dimensions
H3O+ (Plus) stats:
- Larger frame for heavier tenders.
- Electric 12v winch with remote control and battery pack. Braking hand winch available.
- Removable & collapsible 6′ winch arm.
- Adjustable inner bunk system for added support.
- Overall Weight: 90 pounds (40.82 kg).
- 725 pounds (328.85 kg) capacity.
- H3O+ Davit Extension available.
- H3O+ Dimensions
If you need more room on your platform for your tender, add a Davit Extension.
Review our Recommended Tie-Down Method
Please send us pictures and/or videos!
Ask about our special Highfield tender davit inserts.
![Davit Accessories: Toggles - Stainless - Qty.4 [TOG-1012]. To fasten Mounts, where the other side is inaccessible.](https://dev.hurleymarine.com/wp-content/uploads/2013/11/davit-accessories-toggles-stainless-qty-4-tog-1012-500x500.jpg)
![H2O Davit Accessories: SS Mount Pin 1" - Replacement - each [H2O-1012P]](https://dev.hurleymarine.com/wp-content/uploads/2013/11/HMpi_SSpinsRpEaHTD-1012A-500x500.jpg)
![Davit Accessories: Stainless Steel Pin Lanyards 6" - pair: [PPL-1012]](https://dev.hurleymarine.com/wp-content/uploads/2013/12/HM_Lanyard-500x500.jpg)
![H2O Davit Accessories: H2O Mounts - pair: [H20-1012M6,8,10]](https://dev.hurleymarine.com/wp-content/uploads/2013/12/HMpi_H2OMountsPrH20-1012M6-500x500.jpg)
Lynn –
Awesome davit system! Thx Hurley Marine.
Woody Bailey, Jr. –
Todd:
I finally had a chance to try out my H3O this past weekend and it worked great for my Sea-Doo Spark.
Woody Bailey, Jr.
Kenneth Sverre –
I have used the H30 on my Sealine SC35 this summer too lift a 330 Rib, it works perfect. Experienced sailors have been impressed how easy it works.
Thank you!
Kenneth Sverre
Norway
Mark Gust –
The H30 is the best new marine product I have seen in a lifetime of boating. If you have a heavy dinghy and/or a higher swim platform this is the BEST solution. FINALLY I can launch and retrieve my Zodiac easily and quickly by myself. Without the H30 I had to recruit others to help me pull it up or remove the motor to lighten it. Now with the H30 I am now seriously considering adding a SeaDoo Spark as a new “toy” for our boating fun because I know I can easily haul and retrieve it. Before this H30 I was actually considering a hydraulic swim platform or a crane as an option.
Happy Boating Everyone!
Mark / Lake St Clair MI
David Toney –
Hi Todd,
Finally got the H3 installed. Works great with the Spark which is about 1/2 weight of other sea doo models. Just thought I’d share.
David Toney
Bryan –
This is a super cool unit. It allows me to put a jet ski on the back on my 34 ft Sea Ray Sundancer (340). Boat runs fine with it on the back. I am so happy. Bryan
Edward –
I had the H2O and it works good. But since i upgraded my dinghy to a bigger one it was a two man job to pull it up. Now I upgraded to the H3O and even my wife can deal with the dinghy. This product has change the way we used to enjoy our dinghy becase before i drop it to the water only if necesary, now I put it in the water every time we anchor and enjoy our platform more. Thanks Hurley Marine from Puerto Rico!
Chris C –
I installed this on a 2003 Rinker 342FV with an AB9.5AL RIB and 9.9hp Mercury. I tried another brand of a pull on type and to say it was difficult to pull up is an underestimate. Finally purchased the H3O after talking with the people at Hurley if there was enough room to use it.
The H3O is amazing! Effortless to load/launch, secure on the platform, dingy secure. Easy install. Had several people come look at it at a raft off party this weekend too. Definately worth the price.
Ron –
We purchased your Opriginal davit to carry our 10 foot AB RIB with its 4hp motor. Over the few years we owned it (we’ve now given it to a friend) we realized it was not the right choice for our 45 foot Sea Ray Sundancer. Its swim platform is 18 inches off the water and the angle needed to haul it up made it increasingly difficult to get the AB up onto the swim platform.
The solution, AND IT REALLY WORKS, is your H3O! Thank you Todd!
Capt. Todd R. Hurley –
Ron:
Thanks. Glad it is serving you well.
Stay the course!
Todd
Marty Russon –
Todd,
You are a genius! Thanks for an incredible davits system. I bought your H3O hand crank davit system. There are so many positives I dont know where to begin. In a word, it worked! I have looked for quite some time for a davit solution that would allow me to load and unload my hard bottom dinghy with a Mercury 9.9 4 stroke all by myself. My bad back really appreciates what you have created in the H3O. Great job!
Marty R
Henrik Andresen –
Hi there!
Wanted to send You pics after installation and purchase of the new GTI (90). This is the only davit I could use! Works fine! Thanks to You I didn’t have to settle for The Spark.
Best Regards,
Henrik Andresen
Norway